The stone engraving machine is mainly used for engraving on stone, and can also be engraved on glass, ceramics and other appliances. Now the engraving industry has this special engraving tool that saves time. Engraving machine engraving, according to the normal operation method, can effectively prevent problems in the machine in use. If you want to last longer, you still need to do daily maintenance.
Regularly do protective treatment, treat dust on machine platforms, etc., and need dustproof equipment. When the machine is running for less than 10 hours, it is necessary to ensure the cleaning of the cooling water and the normal use of the pump. Do not make the water spindle motor run out of water. Replace the cooling water regularly. Do not make the water temperature too high. Working in winter, you need to replace the water in the working environment with antifreeze. After the machine is used up, clean the drive system and add lubricant to keep the system flexible. Polish the rod and other parts with gasoline, add oil, do not make the machine misplaced. It is important that in the process of using the machine, there is a staff member to check the work of the machine. Once the problem is detected, it needs to be repaired immediately.
Do not contaminate contaminated liquids on the machine, do antifouling treatment, use protective agents, and ensure product quality. Stone engraving machine manufacturers recommend that the choice of stone is also to pay attention to, the stone is not good and affect the machine operation.
