INA clutch bearing maintenance work attention summary

Dry the cleaned imported bearings with a dry rag and place them in anti-rust oil. In this process, the clutch bearing should be completely in contact with the rust preventive oil, and the INA bearing should be rotated continuously, so that the oil film formed by the rust preventive oil can cover the surface of the bearing to achieve the purpose of rust prevention.
First, put the bearing into gasoline to clean, wipe off the sludge and dust left on the imported bearings. Any INA bearing with rust is gently wiped with metallographic sandpaper until it is not rough.
Next, use lithium grease, butter, and evenly apply to the surface of the clutch bearing, including the inner and outer rings, wheels, and cage. And the edge of the edge of the rotating bearing, so that the butter really enters the inside of the imported bearing, to fully lubricate.
1. Before measuring the imported bearings, it is necessary to wipe the surface to be tested and the working surface of the level to prevent the bearing from being incorrect or scratching the working surface.
2. When using the level to carry out the measurement of the imported bearing, it is necessary to hold the handshake of the instrument. Do not touch the bubble glass tube and breathe the bubble by hand to prevent the reading accuracy of the level. When looking at the level, the line of sight should be aligned perpendicular to the bubble glass tube, otherwise the reading will be inaccurate.
3. When measuring the clutch bearing, the level should be lightly handled and placed in a stable position. It is not allowed to drag the working surface of the level on the surface of the measuring device. When you hit the horn, you must pick up the level. When checking the plumbness of the façade of the equipment, the applied force is evenly placed against the facade of the equipment.
4. When measuring the INA bearing, when the level is taken from the low temperature to the high temperature, it should not be used immediately, nor under strong light or sunlight. After use, wipe it with a fine white cloth, and apply a thin layer of oil to the special box for safekeeping.
The last process is packaging. In order to save costs, we “turn waste into treasure”, cut the cement packaging bags that have been scrapped in the warehouse into suitable packaging bags, pack and pack the imported bearings, mark the specifications of the clutch bearings and put them back on the shelves for storage.

For more information and purchase please visit: https://www.supplyforever.com